Try the Motoklik App for FREE now!

Motoklik Motocross Data Logger

Motoklik is a data logger, or data acquisition system designed to work for motocross, supercross and enduro. It records suspension position, suspension speed, and satellite enabled lap-timing data. This data can be easily reviewed through the Motoklik app, and uploaded to the Motoklik online dashboard. All of the data that has been uploaded to the dashboard, can be reviewed remotely by your suspension technician.

The motocross data logger has 4 main parts:

  1. Central Control Unit (CCU) located between the triple clamps and behind the front number plate.
  2. Handlebar Controller contains the satellite antenna and data recording button.
  3. Front Suspension Sensor located on the left fork leg.
  4. Rear Suspension Sensor located between the frame and brake master cylinder.

Technical Information

What comes with the Motoklik system.

Motoklik motocross data logger or data acquisition system contained in its packaging.

The above pictures illustrates how the Motoklik motocross data logger system is presented to you the customer.

  1. Motoklik Central Control Unit. This unit is used to distribute power to each of the sensors, record the data from those sensors, and transmit the data via Bluetooth to the mobile app. The unit also contains a 1000mAh 3.7v Lithium battery.
  2. Handlebar Controller with Satellite Position Antenna. The antenna is used to identify and fix to satellites to calculate the current antenna position in latitude, longitude and altitude, and calculate the speed the antenna is moving. The unit also has a clear button cap that can be illuminated in green and red. Flashing red indicates the antenna is trying to obtain a satellite fix, flashing green indicates the satellite is fixed, and solid green indicates that the Motoklik is recording data.
  3. Front Suspension Sensor. The wand houses an array of sensors that determine the front suspensions position based off of the relative position of a magnet located in no. 5, the front magnet housing.
  4. Rear Suspension Sensor. The rear sensor houses an array of sensors that determine the rear suspensions position based off of the relative position of a magnet located in no. 6, the rear magnet housing.
  5. Front Magnet Holder. The holder encloses a 15mm x 5mm Neodymium disc magnet, and connects to the front fork guard of the motorcycle. This part replaces the front brake line clamp holder.
  6. Rear Magnet Holder. The holder encloses a 15mm x 5mm Neodymium disc magnet, and connects to the swingarm on the rear of the motorcycle. It is held in position by bolts used for holding the rear brake line guide in position and / or a cable tie(s).
  7. OBD Power Supply Cable. The cable assembly is made up of three components, the Motoklik connector, the OBD connector (8), and the fuse (9).
  8. OBD Connector. This connector plugs directly into the motorcycles wiring harness and is used to draw a 12v power supply from the motorcycle which is used to power the Motoklik. The power supply from the motorcycle is on a relay which turns off after a certain period when the engine is not running e.g. 30 seconds. When the power supply is removed, the Motoklik device is powered by the internal battery for 10 minutes, and then it turns off also. The Motoklik will not drain the motorcycles battery.
  9. Fuse. The power supply cable also includes a 1A blade type fuse to keep power consumption below 15w.

Motoklik App Features

The data recorded by the Motoklik device is downloaded to the Motoklik mobile app via Bluetooth. The app has 6 basic features:

  1. Lap Timing analysis calculated from the satellite position data.
  2. Section Timing analysis calculated from the satellite position data.
  3. Front and Rear suspension position data.
  4. Bottoming identification to identify where on the track the suspension is using most of the available displacement.
  5. Bottoming analysis to determine if it is an issue with the front or rear of the suspension, and at what speed the suspension is moving.
  6. Live Suspension Sag which allows the user to check the front and rear suspension position in real time.

Motoklik also includes a cloud enabled online dashboard for advanced suspension data analytics.

What Motocross models does this work on?

Product Variations:

The Motoklik system works with:

  • Stark Varg.
  • KTM, GasGas and Husqvarna motocross and enduro modles from 85cc up to 501cc.
  • Yamaha motocross and enduro models from 125cc up to 450cc.
  • Honda motocross and enduro models from 250cc up to 450cc.
  • Kawasaki motocross and enduro models from 250cc up to 450cc.
  • Fantic motocross models from 125cc up to 450cc.
  • Sherco enduro models from 125cc up to 450cc.
  • Beta motocross and enduro models from 125cc up to 450cc.
The kits are designed to work with standard suspension, and kit suspension such as the WP XACT, XACT PRO, WP XPLOR, WP XPLOR PRO, WP Cone Valve 48 & Trax Shock, SHOWA 48, SHOWA 49, KYB SSS, KYB AOS, MX-TECH, Sölva and Öhlins kits.
If you don’t see your make or model listed, contact us by using the chat icon on the bottom right of the screen.